0102030405
HSIN-250A Hydraulic Dead Miisaanka Tijaabaha Piston ee Cadaadiska Cabirka Cabirka (0.5~25) Saxnimada MPa 0.02%FS/0.01%FS/0.005%FS
Muuqaal
1.The qaybaha nidaamka cadaadiska piston patented waa anti-shil, qalab free dissembly iyo isu-ururinta iyo waxa ay ku haboon nadiifinta nidaamka piston iyo xidhitaanka giraanta beddelka, sidoo kale, si degdeg ah oo ammaan ah.
2.Bistanka leh aag yar iyo miisaan yar ayaa si guul leh loo sameeyay oo la tijaabiyay. Waxaa la geliyay wax soo saar waana fududahay in la isticmaalo. Macaamiisha ayaa dooran kara ama la tashan kara hadba sida ay xaaladdu tahay.
3.Two dareemayaasha fogaanta infrared waxay ururiyaan xogta barakicinta piston waxayna soo bandhigaan shaashadda LCD iyada oo loo marayo beddelka xogta nidaamka wareegga, si ay uga dhigaan indho-indheynta barokaca mid habboon oo sax ah.
4. Heerkulka iyo barokaca piston-ka ayaa lagu soo bandhigay shaashadda midabka 3.5-inch.
5.Ku qalabaysan laba mitir oo is-dhexgal degdeg ah (M20) × 1.5), oo leh waalka joogsiga (ikhtiyaarka macaamilka), kaas oo loo isticmaali karo tijaabada xiritaanka.
6.Qalabka joogsiga kursiga fadhiga (ikhtiyaarka macaamiisha) iyo xakamaynta cadaadiska ayaa ah dayactir bilaash ah oo sahlan in lagu shaqeeyo. Naqshadeynta gacanku waa mid macquul ah oo shakhsi ahaaneed iyadoo loo eegayo qaabka gacanta lagu hayo.
7.Qofka ugu weyn ee mashiinka wuxuu qaataa 12mm saxan aluminium ah oo qaro weyn, kaas oo ah mid adag oo deggan. Awoodda kaydinta saliidda ee koobka saliiddu waa 400ml, kaas oo loo habeyn karo iyadoo loo eegayo baahida macaamiisha.
8.Koobka saliidda ayaa la ballaarin karaa si loo fududeeyo cabbirka tiro badan oo dareemayaasha. Qalabka shaandhada saliidda ayaa ku qalabaysan koobka. Dhuumaha ku xiran saldhigga mitirka waxay si toos ah ugu xiran yihiin koobka saliidda waxayna sii maraan qalabka shaandhada bulaacada si loo hubiyo nadiifinta saliidda gelaysa nidaamka piston-ka, si looga fogaado xannibaadda iyo waxyeelada ay keento saliidda wasakh ah ee soo galaya nidaamka piston. , iyo xitaa qalalka iyo jabka usha piston.
9. Nidaamka wareegga saliidda wuxuu leeyahay shaqada qashinka wasakhda ah, iyo habka dayactirka iyo nadiifinta waa mid kooban oo ku habboon.
10.Qaybta bandhigga piston waxay ku qalabaysan tahay taabasho taabasho iyo badhanka cabbirka barokaca. Tilmaamaha degdega ah ee qiyaasidda barokaca ayaa lagu soo bandhigi karaa shaashadda iyada oo loo marayo hawlgalka, taas oo ku habboon macaamiisha inay isticmaalaan.
Isticmaal deegaan
1. Heerkulka deegaanka: (20 ± 1) ℃
2.Qoyaan qaraabo ah: qolka heerkulka joogtada ah ee ka hooseeya 85%
3.Korantada korontada: AC 220V
4.Xadiga soo noqnoqda: 50Hz
5. Ma jiro gariir farsamo oo saameeya waxqabadka cabbirka inta lagu jiro isticmaalka
Halbeegyada Xulashada
 | | |  | |
| HSIN-6 | HSIN-60A | HSIN-60B | HSIN-250A | |
| (0.04～0.6)MPa | (0.1～6)MPa | (0.1～6)MPa | (0.5～25)MPa | |
| Sax: 0.05/0.02/0.01/0.005 | Sax: 0.05/0.02/0.01/0.005 | Saxnimada: 0.05 | Saxnimada: 0.02/0.01/0.005 | |
| | | | |
| HSIN-250B | HSIN-600A | HSIN-600B | HSIN-600C | |
| (0.5～25)MPa | (1～60)MPa | (1～60)MPa | (1～60)MPa | |
| Saxnimada: 0.05 | Saxnimada: 0.005 | Saxnimada: 0.01 | Saxnimada: 0.02/0.05 | |
| | | | |
| HSIN-1000A | HSIN-1000B | HSIN-1600A | HSIN-1600B | |
| (1 ama 2～100)MPa | (1 ama 2～100)MPa | (1 ama 2～160)MPa | (2～160)MPa | |
| Saxnimada: 0.01/0.005 | Saxnimada: 0.02/0.05 | Saxnimada: 0.01/0.005 | Saxnimada: 0.02/0.05 | |
 | | |||
| HSIN-2500 | HSIN-5000 | |||
| (5～250)MPa | (5～500)MPa | |||
| Sax: 0.02/0.05/0.01/0.005 | Saxnimada: 0.02/0.05/0.01 | |||
| Usha bistoonka / walxaha: tungsten carbide / walxaha miiska: saxan daawaha aluminium | ||||
| Cabbirka: HSIN-6～HSIN1600 B: (680*480*310) mm HSIN-2500～HSIN5000: (710*510*360) mm | Miisaanka: HSIN-6～HSIN1600 B: 26kg HSIN-2500～HSIN5000: 35kg | |||
| Dhex dhexaad: HSIN-6～HSIN60B: 25#Keenmatic viscosity ee saliidda isku qasan ee Transformer oil iyo kerosene aviation waa 9 ~ 12m ㎡/s at 20 ℃, qiimaha aysiidhka kama badna 0.05mgkoh/g, iyo saamiga 4.29 (25 # saliidda beddelka): 1 (Kerosene duulista). Hsin250a～hsin5000: di (2-ethylhexyl) sebacate. | ||||
Habaynta Miisaanka
| HSIN-6 | HSIN-60A | ||||||||
| Tilmaamaha (MPa) | Tirada (block) | Dhexroorka Φ (mm) | Miisaanka (kg/ gabal) | Qalab | Tilmaamaha (MPa) | Tirada (block) | Dhexroorka Φ (mm) | Miisaanka (kg/ gabal) | Qalab |
| 0.05 | 10 | 135 | 0.5 | bir aan lahayn | 0.5 | 11 | 225 | 2.5 | bir aan lahayn |
| 0.01 | 6 | 108 | 0.1 | Aluminium | 0.1 | 4 | 135 | 0.5 | bir aan lahayn |
| HSIN-60B | HSIN-250A | ||||||||
| Tilmaamaha (MPa) | Tirada (block) | Dhexroorka Φ (mm) | Miisaanka (kg/ gabal) | Qalab | Tilmaamaha (MPa) | Tirada (block) | Dhexroorka Φ(mm) | Miisaanka (kg/ gabal) | Qalab |
| 0.5 | 11 | 160 | 1 | bir aan lahayn | 2.5 | 9 | 225 | 2.5 | bir aan lahayn |
| 0.1 | 4 | 108 | 0.2 | bir aan lahayn | 0.5 | 4 | 135 | 0.5 | bir aan lahayn |
| HSIN-250B | HSIN-600A | ||||||||
| Tilmaamaha (MPa) | Tirada (block) | Dhexroorka Φ (mm) | Miisaanka (kg/ gabal) | Qalab | Tilmaamaha (MPa) | Tirada (block) | Dhexroorka Φ (mm) | Miisaanka (kg/ gabal) | Qalab |
| 2.5 | 9 | 180 | 1.25 | bir aan lahayn | 5 | 11 | 280 | 5 | bir aan lahayn |
| 0.5 | 4 | 108 | 0.25 | bir aan lahayn | 1 | 4 | 160 | 1 | bir aan lahayn |
| HSIN-600B | HSIN-600C | ||||||||
| Tilmaamaha (MPa) | Tirada (block) | Dhexroorka Φ (mm) | Miisaanka (kg/ gabal) | Qalab | Tilmaamaha (MPa) | Tirada (block) | Dhexroorka Φ (mm) | Miisaanka (kg/ gabal) | Qalab |
| 5 | 11 | 225 | 2.5 | bir aan lahayn | 5 | 11 | 180 | 1.25 | bir aan lahayn |
| 1 | 4 | 135 | 0.5 | bir aan lahayn | 1 | 4 | 108 | 0.25 | bir aan lahayn |
| HSIN-1000A | HSIN-1000B | ||||||||
| Tilmaamaha (MPa) | Tirada (block) | Dhexroorka Φ (mm) | Miisaanka (kg/ gabal) | Qalab | Tilmaamaha (MPa) | Tirada (block) | Dhexroorka Φ (mm) | Miisaanka (kg/ gabal) | Qalab |
| 10 | 9 | 280 | 5 | bir aan lahayn | 10 | 9 | 225 | 2.5 | bir aan lahayn |
| 4 | 1 | 200 | 2 | bir aan lahayn | 4 | 1 | 160 | 1 | bir aan lahayn |
| 2 | 2 | 160 | 1 | bir aan lahayn | 2 | 2 | 135 | 0.5 | bir aan lahayn |
| 1 | 1 | 135 | 0.5 | bir aan lahayn | 1 | 1 | 108 | 0.25 | bir aan lahayn |
| HSIN-1600A | HSIN-1600B | ||||||||
| Tilmaamaha (MPa) | Tirada (block) | Dhexroorka Φ (mm) | Miisaanka (kg/ gabal) | Qalab | Tilmaamaha (MPa) | Tirada (block) | Dhexroorka Φ (mm) | Miisaanka (kg/ gabal) | Qalab |
| 10 | 15 | 280 | 5 | bir ahama bir ah | 10 | 15 | 225 | 2.5 | bir aan lahayn |
| 4 | 1 | 200 | 2 | bir aan lahayn | 4 | 1 | 160 | 1 | bir aan lahayn |
| 2 | 2 | 160 | 1 | bir aan lahayn | 2 | 2 | 135 | 0.5 | bir aan lahayn |
| 1 | 0 | 135 | 0.5 | bir aan lahayn | 1 | 1 | 105 | 0.25 | bir aan lahayn |
| HSIN-2500 | HSIN-5000 | ||||||||
| Tilmaamaha (MPa) | Tirada (block) | Dhexroorka Φ (mm) | Miisaanka (kg/ gabal) | Qalab | Tilmaamaha (MPa) | Tirada (block) | Dhexroorka Φ (mm) | Miisaanka (kg/ gabal) | Qalab |
| 20 | 11 | 225/280 | 4/5 | bir aan lahayn | 25 | 19 | 280 | 5 | bir aan lahayn |
| 10 | 2 | 200/225 | 2/2.5 | bir aan lahayn | 20 | 1 | 225 | 4 | bir aan lahayn |
| 5 | 1 | 160/180 | 1/1.25 | bir aan lahayn | 10 | 1 | 200 | 2 | bir aan lahayn |
| 5 | 2 | 160 | 1 | bir aan lahayn | |||||